Multimedia Setup Procedure

We have been having a few problems getting a signal to the new projector, to narrow down weather this is a cable problem or a startup problem please follow these steps.
Also FYI, there is a blue cat5 cable stored on the left side of the rolling storage unit, that cable is 150' long and is used if the plugin system fails. If the convertor fails then you need to connect the VGA out from the switcher to the projector directly.

1. Make sure all units are off, including the projector.
2. Connect all cables (power and data)
3. Start computer, VCR and DVD
4. After computer boots, start Kramer switcher
5. Send an image to the screen for algning the screen
6. Start projector and align (if using 2 projectors start the left unit first (white) then the right (grey).
7. Please make sure the projectors are strapped down after aligning.
7. Shut down, projector first to allow it to cool down.

thanks for your help in sorting this out,
Keith